D&S Style Couplers

(American and European models available).

Safe, efficient and simple to operate, it meets all of your performance requirements.

Safe:
A high-capacity pressure relief valve has been incorporated as an integral part of the coupler body. This serves two purposes: first, when functioning with other relief devices in the system, it will prevent a keg from reaching pressures in excess of recommended working pressure. Secondly, it allows the user to relieve pressure when needing to prevent or correct dispensing problems.

Efficient:
Designed for maximum flow, it can be used for either single or series keg dispensing.

Short handle is ideal for 1/6 kegs.

Specially designed pressure inlet nipple eliminates the need for a coupling washer when used with standard NADS check valve.

Flow of gas is controlled by lever handle; in up position pressure is off, when down it is on.

Simple:
Locate coupler onto the keg valve and rotate clockwise until secure. Pull the lever handle out and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense.

The coupler can be quickly dismantled for cleaning and periodic service. No special tools required.

NADS

Model:	Description:
CH5000	Coupling Head w/ Blue Handle
CH5001	Coupling Head w/ Red Handle
CH5002	Coupling Head w/ Black Handle
CH5100	European Model w/ Black Handle
CH5000SS	Coupling Head w/ S.S. Probe, Gray Handle

Taprite

Model:	Description:
CH5000 - 45L	Lever Tap with Kam-Loc barrel for US kegs
CH5100L	Lever Tap with Kam-Loc barrel lock for European kegs

	KAM-Loc Keg lock feature ends unexpected spray of beer or loss of gas… guided Kam-Loc arm prevents the tap from being removed from keg with the probe in the tapped position. The next keg cannot be tapped with the probe in the “down” or “tapped” position
	Forged brass body has a male beer thread pressure inlet; by removing hex nut, nipple, and check valve assembly tap can be used for series tapping
	Probe check valve retainer is easily removable for cleaning and also acts as a beer line washer
	Built-in pressure line shut-off prevents loss of gas when the keg is untapped
	Integral non-adjustable safety (set at 55-65 PSIG) protects kegs against accidental over-pressurization
	Safety has easy to use manual bleed-off; improper applied pressure conditions can be corrected
	Available for U.S. or European Single Valve Keg