Disassemble
the faucet and remove the Faucet Shaft and Lever
2.
Re-Assemble
the Faucet with the NADS Lock Assembly added to the
front of the Faucet Shaft with the Lever Assembly in
its correct position. Screw the Cover Unit on to
the faucet shaft with the Torx wrench provided until
the cover is lined up with the groove on the faucet
shaft . Be sure the faucet shaft is allowed the entire
length of travel so it will operate properly. The
cover unit is designed to remain on the faucet shaft
during normal operation.
3.
To
lock the assembly, tighten the screw in the front of
the NADS lock assembly until the assembly seats snugly
against the faucet body. This will not allow any operation
of the lever thereby preventing any liquid to be dispensed.
4.
To
Unlock the NADS Faucet Assembly, Turn Torx screw with
Torx wrench (counterclockwise approx 7 turns, until
groove is visible)
5.
To
clean the faucet assembly just disassemble the unit
in the reverse order of the above instructions, again
using the Torx Wrench provided.
6.
Please
Note....This product does not fit Perlick Style Split
Lever Type Faucets.
