| |
Series
3000 Primary Regulators (for direct cylinder mount) have
an integral safety, stainless steel ball check valves and
a self-relieving diaphragm. In the event of a failure of
the regulator seat, this safety will respond instantaneously
protecting anything downstream from potentially dangerous
high pressure. The maximum down stream pressure the system
will see will not exceed 143 psig in accordance with NSDA
guidelines.
| Regulator: |
|
 |
| Test Pressure |
3300 psig (227.59
bar.) |
|
| Maximum Inlet
Pressure |
3000 psig (206.90
bar.) |
|
| Operating Range |
0-130 psig (0-8.97
bar.) |
|
| Temperature Range |
-40F/+200F (-40C/+93C) |
|
| Safety |
Preset 130 psig
(8.97 bar.) |
|
| Mounting |
Wall or Bottle |
|
| HP Ports |
1/4" FPT
= Left |
|
| LP Ports |
1/4" FPT
= Right |
|
| High Pressure
Hose: |
|
|
| Burst Pressure |
14,000 psig (965.52
bar.) |
|
| Maximum Working
Pressure |
2,700 psig (186.21
bar.) |
|
| Inlet |
CO2 (F) Swivel |
|
| Outlet |
1/4" SAE
(F) |
|
| Bend Limiter |
Vinyl |
|
| Model |
Description |
| 3735 |
1P X 5P, 160lb & 2000lb gauge, CO2 tank fitting, horizontal manifold, (5) X ¼" flare with check valve |
| 3741 |
1P X 1P, 160lb & 2000lb gauge, CO2 tank fitting, ¼" flare with check valve outlet |
| 3752 |
2PX2P, 160lb & 2000lb gauge, CO2 tank fitting, ¼" flare with check valve outlet |
| 3753 |
2P X 3P, 160lb & 2000lb gauge, CO2 tank fitting, 3" X ¼" flare check valve |
| 3754 |
2P X 4P, (2+2) outlets, 160lb & 2000lb gauge, CO2 tank fittings, ¼" flare with check valve outlet |
| 3756-01 |
2P X 2P, (3+3) outlets, 100lb & 2000lb gauge, CO2 tank fitting, ¼" flare check valve |
|
