| |
The TAPRITE ADVANTAGE
- Taprite regulators are built and tested in accordance with UL Standard 252 for Compressed Gas Regulators and UL 252A for Compressed Gas Regulator Accessories
- All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E
- High CO2 volumetric flow provides continuity in product dispensing
- Polycarbonate bonnet will not chip, break or fade
- 10 Micron filter built in to keep contaminants out of regulator
- One repair kit for primary and secondary
During the Manufacturing process the following
tests are conducted:
- Safety Activation and Blow-Off
- Leak Testing - all connections of accessories are
checked. Bonnet cap, diaphragm and capsule are properly
torqued and pressure tested
- Component testing - gauges, fittings and other
accessories are pressure tested once assembled, to insure
they are working properly
- A sampling of each work order is randomly checked for
workmanship, safety testing, leak testing and component
checks
- Engineering Lab Testing - production regulators are
randomly taken from stock and checked for Pressure Decay
and Flow Rate performance criteria
| Regulator: |
|
 |
| Test Pressure |
6600 psig (455.17
bar.) |
|
| Maximum Inlet
Pressure |
3300 psig (227.59
bar.) |
|
| Operating Range |
0-130 psig (0-8.97
bar.) |
|
| Temperature Range |
-40F/+200F (-40C/+93C) |
|
| Safety |
Preset 130 psig
(8.97 bar.) |
|
| Mounting |
Wall or Bottle |
|
| HP Ports |
1/4" FPT
= Left |
|
| LP Ports |
1/4" FPT
= Right |
|
| High Pressure
Hose: |
|
|
| Burst Pressure |
14,000 psig (965.52
bar.) |
|
| Maximum Working
Pressure |
2,700 psig (186.21
bar.) |
|
| Inlet |
CO2 (F) Swivel |
|
| Outlet |
1/4" SAE
(F) |
|
| Bend Limiter |
Vinyl |
|
| Model Numbers |
| T5740HP160BK |
Body only, black cap, no fittings, (0-120 PSI) for 160 gauge |
| T5741PMHP |
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve red cap |
| T5741PMHPB |
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve blue cap |
| T5741PMHPBK |
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve black cap |
| T5741PMHPBKGP |
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve black cap, metal gauge guard |
| T5741PMHPGPS |
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve red cap, gauge boot |
| T5745HPBK |
1P X 5P, 160lb & 2000lb gauge, (5) X ¼" flare with check valve (vertical manifold) red cap |
| T5752HP-02 |
2P x 2P, 160LB & 2000LB gauge, ¼" flare with check valve red cap |
| Wall Mount Regulators |
| T5741WMHP |
1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check valve red cap |
| T5741WMHP-3 |
1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check valve red cap, 3 foot hose with CO2 tank fitting |
| T5741WMHP-6 |
1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check red cap, 6 foot hose with CO2 tank fitting |
|
