| |
Series
5200SN Secondary Regulators (for wall mount) have a new interlocking
seat and diaphragm, an integral safety and a self-relieving
diaphragm. In the event of a failure of the regulator seat,
this safety will respond instantaneously protecting anything
downstream from potentially dangerous high pressure. The
maximum down stream pressure the system will see will not
exceed 143 psig in accordance with NSDA guidelines. All four
ports are 1/4" NPT(F) right hand, and the non-removable
adjustment screw is standard.
| Regulator: |
|
 |
| Test Pressure |
3300 psig (227.59
bar.) |
|
| Maximum Inlet
Pressure |
3000 psig (206.90
bar.) |
|
| Operating Range |
0-100 psig (0-6.90
bar.) |
|
| Temperature Range |
-40F/+200F (-40C/+93C) |
|
| Safety |
Preset 130 psig
(8.97 bar.) |
|
| Mounting |
Wall |
|
| HP Ports |
1/4" FPT
= Right |
|
| LP Ports |
1/4" FPT
= Right |
|
| Operating Ranges: |
|
| Note: Adjustment
range or regulator is determined by the down-stream pressure
gauge installed. |
|
| 0-30 psig (0-2.07
bar.) |
|
| 0-60 psig (0-4.24 bar.) |
|
| 0-100 psig (0-6.90 bar.) |
|
| 0-130 psig (0-8.97
bar.) |
|
| Model Numbers |
| T5260SN100 |
Body assembly for 100lb gauge gold cap |
| T5260SN100BK |
Body assembly for 100lb gauge black cap |
| T5260SN160 |
Body assembly, 0-120 PSI, 160lb gauge gold cap |
| T5260SN160BK |
Body assembly, 0-120 PSI, 160lb gauge black cap |
| T5260SN60 |
Body assembly for 60lb gauge gold cap |
| T5260SN60BK |
Body assembly for 60lb gauge black cap |
| T5261SN |
1P X 1P 100lb gauge, ¼" flare inlet, ¼" flare check valve outlet, gold cap |
| T5261SN60 |
1P X 1P 60lb gauge, ¼" flare inlet, ¼" flare check valve outlet, gold cap |
| T5261SNBK |
1P X 1P 100lb gauge, ¼" flare inlet, ¼" flare with check valve out black cap |
| T5261SNBL |
1P x 1P 100lb gauge, ¼" flare inlet/thru, ¼" flare with check valve outlet blue cap |
| T5261SND |
1P X 1P, 30lb gauge, ¼" flare inlet, ¼" flare with check valve outlet gold cap |
| T5261ST |
1P X 1P, 100lb gauge, ¼" flare inlet, ¼" flare with shutoffs outlet gold cap |
| T5272SN |
2P X 2P, 100lb gauge, ¼" flare inlet/out, ¼" flare with check valve outlet, metal brackets, gold cap |
| T5272SNG |
2P X 2P, 100lb gauge, ¼" flare inlet/thru, ¼" flare with check valve outlet, glide brackets, gold cap |
| T5272SN-375 |
2P X 2P, 160lb gauge, 3/8" flare outlet, ¼" flare check valve outlet gold cap |
| T5276SND |
2P X 2P, 100lb & 30lb gauges, ¼" barb inlet/outlet + vertical manifold (4 barbs+ 1 flare), metal brackets, gold cap |
|
